1. BENVENUTO SU CONSOLE TRIBE

    Benvenuto, stai navigando nella nostra community come ospite

    Avere un account su Console Tribe ti permetterà di creare e partecipare alle discussioni e al mercatino, organizzare tornei e partite online, iniziare conversazioni personali con gli altri giocatori del forum e di utilizzare tutte le funzioni di questo sito.

    Registra il tuo account in meno di 5 secondi, se vuoi puoi sfruttare i login social via Facebook, Google Plus o Twitter.

[BREAKING NEWS]: Universal Debricker & Downgrader

Discussione in 'PSP News' iniziata da lycenhol, 23 Agosto 2007.

  1. Baglioooo

    Baglioooo Tribe Member

    Registrato:
    3 Maggio 2007
    Messaggi:
    1.618
    "Mi Piace" ricevuti:
    0
    Punteggio:
    120
  2. salvuccio_90

    salvuccio_90 Tribe Member

    Registrato:
    3 Gennaio 2007
    Messaggi:
    4.962
    "Mi Piace" ricevuti:
    0
    Punteggio:
    38
    Località:
    Catania
    perfetto.adesso dobbiamo attendere alla guida e poi qualcuno che ha la psp brickata,di provare ;)
  3. asari

    asari Tribe Member

    Registrato:
    28 Febbraio 2007
    Messaggi:
    563
    "Mi Piace" ricevuti:
    0
    Punteggio:
    16
    altre info:

    - la batteria modificata la puoi usare quando ti pare

    - la batteria modificata non puo essere piu riutilizata per accendere la psp normalmente, solo collegando l'alimentatore e poi inserendo la batteria nel vano apposito.

    - la batteria può tornare "normale"

    Citazione:
    - Avviare dal menù Gioco->Memory Stick l'applicazione Pandora's Battery Creator.
    - Si consiglia di premere il Tasto TRIANGOLO per eseguire il backup della flash sulla Memory Stick in modo da ripristinare la sua normale funzione in futuro.
    - Premere il tasto CROCE affinchè possa iniziare il processo di flashing.
    - Attendete la fine del processo e ad operazione ultimata la vostra Batteria si trasformerà in una batteria "JigKick"


    -dovete avere almeno un'altra psp con 1.50 o CF per modificare la batteria. (altrimenti non è possibile avviare l'homebrew).

    - potete downgradare QUALSIASI psp attualmente in commercio (quindi fino alla 3.52).

    - una volta downgradato a 1.50 non si puo aggornare ad un custom firmware, bisogna aggornare a un'altro fw e da li rifare la procedura di downgrade a 1.50, da li in poi con la psp CI FATE QUELLO CHE VI PARE!!!

    -funziona con qualsiasi batteria.
    Automerged Message for DoublePosting
    forse provo oggi a downgredare una psp 3.52...:D
  4. Ivan

    Ivan Administrator

    Registrato:
    9 Dicembre 2002
    Messaggi:
    17.494
    "Mi Piace" ricevuti:
    33
    Punteggio:
    1.007
    Località:
    H3||
    aspettiamo che il buon teknold faccia da cavia per l'ennesima volta per un tutorial.
  5. StevenRock

    StevenRock Tribe Member

    Registrato:
    14 Gennaio 2007
    Messaggi:
    893
    "Mi Piace" ricevuti:
    0
    Punteggio:
    80
    Località:
    Su Internet
    secondo voi puo creare problemi con le ta-082?
  6. asari

    asari Tribe Member

    Registrato:
    28 Febbraio 2007
    Messaggi:
    563
    "Mi Piace" ricevuti:
    0
    Punteggio:
    16
    stò cercando risposte a questo ma nn si sa ankora nulla...cmq credo di no... perchè le kiavi id si rovinano per questo si aggiorna da 1.50 ad un'altro fw superiore per poi rifare il downgrade!
  7. Mihawk

    Mihawk Tribe Member

    Registrato:
    20 Ottobre 2005
    Messaggi:
    18.550
    "Mi Piace" ricevuti:
    0
    Punteggio:
    38
    una cosa non ho ben chiara:

    dice che le chavi idstorage non saranno completamente ripristinate e non c'è modo di ripristinarle

    quindi usando per esempio il Key cleaner non si riesce a fare un cazzo?


    perchè chi ha le Ta-082 sà cosa siginifica avere le chiavi corrotte...luminosità homebrew che non partono ecc..
  8. asari

    asari Tribe Member

    Registrato:
    28 Febbraio 2007
    Messaggi:
    563
    "Mi Piace" ricevuti:
    0
    Punteggio:
    16
    aggiornando ad un'altro fw superiore le chiavi credo si correggono... poi basta fare un downgrade ed è fatta, e se si hganno problemi usare l'id sotorange fix

    EDIT:
    Per rispristinare la "modalià normale" della batteria modificata, qualora non ne avete una supplementare:
    - Togliete la batteria modificata dalla PSP.
    - A PSP spenta inserire una memory stick che non sia quella modificata per la procedura.
    - Inserire il plug dell'alimentazione esterna ed avviare la PSP.
    - Al momento in cui lo schermo si inizaia ad accendere inserire subito la batteria.
    - La PSP si avvierà in modalità normale con la batteria modificata.
    - Avviare dal menù Gioco->Memory Stick l'applicazione Pandora's Battery Creator.
    - Sul menu su schermo premere il Tasto QUADRATO ed attendere la fine del processo.
    Ovviamente dovete avere la copia di backup della flash della batteria precedentemente creata.erire la Memory Stick modificata.
  9. Mihawk

    Mihawk Tribe Member

    Registrato:
    20 Ottobre 2005
    Messaggi:
    18.550
    "Mi Piace" ricevuti:
    0
    Punteggio:
    38
    bè speriamo proprio sia cosi...
  10. StevenRock

    StevenRock Tribe Member

    Registrato:
    14 Gennaio 2007
    Messaggi:
    893
    "Mi Piace" ricevuti:
    0
    Punteggio:
    80
    Località:
    Su Internet
    boh......beh ki prova su ta-082 ci faccia sapere!!
  11. Sariddu

    Sariddu Tribe Member

    Registrato:
    27 Dicembre 2006
    Messaggi:
    3.687
    "Mi Piace" ricevuti:
    0
    Punteggio:
    38
    Località:
    Caltanissetta
    vedi che nel quote è rimasto link e fonte del post di digimau che hai cancellato giustamente....

    in ogni caso, io credo che vada anche sulle slim, ora saranno già in produzione vero? non è che correggono il problema ora vero?
  12. asari

    asari Tribe Member

    Registrato:
    28 Febbraio 2007
    Messaggi:
    563
    "Mi Piace" ricevuti:
    0
    Punteggio:
    16
    io credo sia possibile portare la psp a qualunque firmware si vuole... però nn sò se funziona e se le chiavi id non saranno comunque danneggiate...
    Automerged Message for DoublePosting
    è difficile che cambino ora...
    oppure può darsi ke hanno già cabiato sistema da quando ci fu quel rumor di ps3news
  13. Mihawk

    Mihawk Tribe Member

    Registrato:
    20 Ottobre 2005
    Messaggi:
    18.550
    "Mi Piace" ricevuti:
    0
    Punteggio:
    38
    se le chiavi id rimangono fregate e non c'è modo di ripristinarle con nessuno di quei nuovi programmi usciti è una bella menata...
  14. asari

    asari Tribe Member

    Registrato:
    28 Febbraio 2007
    Messaggi:
    563
    "Mi Piace" ricevuti:
    0
    Punteggio:
    16
    si aggiorna a 2.00 o 2.71 o altro e si fa il downgrade... dicono che così si risolve il problema

    questa è una guiida ke ho trovato su maxconsolle: [\B]

    Files:
    Firmware 1.50
    Pandora's Battery Files

    Here's how I got it to work:

    Step 1: Extract the .ZIP file.

    Step 2: Insert the memory stick that you want to turn into a "magic memory stick." Back up the contents of the stick to your computer.

    Step 3: Use the built-in format tool (in the PSP System Settings menu) to reformat your memory stick.

    Step 4: Connect your PSP in USB mode.

    Step 5: Open a command prompt (Start -> Run -> cmd)

    Step 6: In the command prompt, switch into the 'mspformat' folder you extracted in step 1... wherever you put it.

    Step 7: Type "mspformat X" where X is the drive of your PSP. Do not include the colon. For example, my PSP is connected at O:, so I type "mspformat O".

    You should see a prompt like this:

    >>> C:\psp\pandora\mspformat>mspformat.exe O
    >>> You are about to format the drive O.
    >>> All data will be lost. Do you want to continue? [Y]

    Type 'y'.


    >>> y

    and you should see


    >>> Drive succesfully formatted, and partition moved.

    Step 8: Disconnect from USB mode, then remove and re-insert your memory stick. Reconnect in USB mode.

    Step 9: On your memory stick, make sure that you have folders named GAME and GAME150 in a folder named PSP. If you don't have them, make them.

    Step 10: Copy the two folders from 'battery' into GAME (for 1.50) or GAME150 (for custom firmware). The folders should be named "pandora_battery" and "pandora_battery%", so they should be \PSP\GAME\pandora_battery and \PSP\GAME\pandora_battery% (or \PSP\GAME150\pandora_battery and \PSP\GAME150\pandora_battery%).

    Step 11: Disconnect from USB mode, insert the battery you wish to use as your unbricker, and run "Pandora's Battery Creator" from the Memory Stick section of the GAME menu.

    Step 12: ***OPTIONAL - SEE NOTE *** Press Triangle to back up the contents of your battery's flash into a file on you memory stick. The program will automatically exit. Run "Pandora's Battery Creator" one more time. *Note:* This step is REQUIRED if you want to make this a normal battery again; otherwise it's optional.

    Step 13: Press X to turn your battery into an unbricking battery (a Service Mode battery). The program will automatically exit.

    Step 14: Connect in USB mode.

    Step 15: Copy the Firmware 1.50 update file onto the root of your memory stick; it should be the same place as your "PSP" folder. Rename it to "UPDATE.PBP".

    Step 16: The extracted folder "installer" contains two folders. Copy both of these into the same place you copied "pandora_battery".

    Step 17: Disconnect from USB mode and run "Pandora's Battery Firm. Installer" from the Memory Stick section of the GAME menu.

    Step 18: Press X to unpack the 1.50 firmware files into their proper place on your memory stick. The program will automatically exit. If this step fails, go back into USB mode and rename "UPDATE.PBP" to just "UPDATE", then try again.

    Step 19: Connect in USB mode. Look in the root of your memory stick (where you have the PSP folder and the UPDATE.PBP file). There should be a file named "msipl.bin".

    Step 20: Copy "msipl.bin" into the folder called "msinst" that was extracted from the ZIP file.

    Step 21: In the Command Prompt, switch into the "msinst" folder... wherever you put it.

    Step 22: Type "msinst X msipl.bin" where X is the drive of your PSP. Do not include the colon. For example, my PSP is connected at O:, so I type "msinst O msipl.bin".

    You should see a prompt like this. I guarantee that your stuff will be slightly different; it depends on how your computer is set up, what sort of memory stick you have, and so on. As long as you get the "Are You Sure? [Y]" prompt, you know that the msipl.bin file is OK.


    >>> C:\psp\pandora\msinst>msinst O msipl.bin
    >>> PSP MS IPL Installer
    >>> Load IPL code msipl.bin
    >>> 241664 bytes(59 block) readed
    >>>
    >>> Target DRIVE is 7
    >>> Check partation Sector
    >>> boot status 0x80
    >>> start head 0x05
    >>> start sec/cyl 0x0004
    >>> partation type 0x06
    >>> last head 0x0F
    >>> last sec/cyl 0xB7E0
    >>> abs sector 0x00000810
    >>> ttl sector 0x000767F0
    >>> signature 0xAA55
    >>> Check BPB Sector
    >>> signature AA55
    >>> Check free reserved sector:OK
    >>> Write ABS Sector 0x10 to 0x1E7
    >>> Are You Sure ?[Y]

    Type 'y'.


    >>> y

    and you should see


    >>> Write MS BOOT CODE

    That means that you now have a "magic" memory stick.

    You're all set!

    To unbrick a bricked PSP (this part's a lot easier, I promise):

    1. With a working PSP or memory stick reader, copy the firmware 1.50 update file into the root of the "magic" memory stick, namd UPDATE.PBP, just like in step 15 above.
    2. Insert the "magic" memory stick.
    3. Insert the unbricker battery. Your wifi, memory stick, and power lights should all turn on temporarily, and a menu should appear.
    4. Press X. After it checks the update file, you should get another menu.
    5. Press X to write Firmware 1.50 onto the PSP.

    That's it... just let it work!
  15. Bimaki

    Bimaki Tribe Member

    Registrato:
    15 Dicembre 2006
    Messaggi:
    3.589
    "Mi Piace" ricevuti:
    0
    Punteggio:
    38
    ma penso che key cleaner dovrebbe risolvere il problema cmq dato che questa è la prima versione penso che uscira anche la v2 migliorata
  16. Mihawk

    Mihawk Tribe Member

    Registrato:
    20 Ottobre 2005
    Messaggi:
    18.550
    "Mi Piace" ricevuti:
    0
    Punteggio:
    38
    bè asari...era proprio con il dw da 2.71 ecc che si corrompevano le chiavi...si corromperebbero 2 volte e saremmo al punto di prima...bisogna che qualcuno provi keycleaner...
  17. Hellrider

    Hellrider Tribe Member

    Registrato:
    17 Dicembre 2006
    Messaggi:
    6.389
    "Mi Piace" ricevuti:
    0
    Punteggio:
    247
    Località:
    Al nord.
    1. Le nostre news vengono tutte da siti inglesi, non dalla concorrenza, furbone.
    2. Potevi aiutare facendo qualcosa di tuo.
    3. Ciao
    4. Totalitaria? Che siamo sotto regime dittatoriale? -.-
  18. Baglioooo

    Baglioooo Tribe Member

    Registrato:
    3 Maggio 2007
    Messaggi:
    1.618
    "Mi Piace" ricevuti:
    0
    Punteggio:
    120
    adesso la sparo là: non si potrebbe modificare il programma che va a scrivere nella batteria in modo da poterla usare come normale?
    mi spiego: facendola diventare una jigkick non può essere usata normalmente se non swappando tra alimentatore e batteria.
    modificando tale programma non si potrebbe dire alla batteria di bootare dalla ms solo se i file sono qll giusti e sennò di avviarsi normalmente dalla flash?
  19. lycenhol

    lycenhol Tribe Active Member

    Registrato:
    31 Maggio 2006
    Messaggi:
    30.199
    "Mi Piace" ricevuti:
    257
    Punteggio:
    4.957
    Località:
    Nella tonnara come Rais
    Non è vero, nego! Io l'ho presa da un sito francese!

    @Baglioooo: quanto pensi sia grosso il programma contenibile nella batteria! :D Esagerato!
  20. Baglioooo

    Baglioooo Tribe Member

    Registrato:
    3 Maggio 2007
    Messaggi:
    1.618
    "Mi Piace" ricevuti:
    0
    Punteggio:
    120
    mah, per aggiungere(parlo in basic) un if...then(o un trigger in c, non so come è lo c non l'ho mai programmato) non serve molto spazio credo