Custom Firmware All-In-One Module v0.01a For PSP 1.5

[Biby]

Aggiornamento della versione 0.01 del medesimo programma.
In questa nuova release sono stati sistemati alcuni bugs, aggiornati i moduli e modificati i controlli.

Custom Firmware All-In-One Module v0.01a For PSP 1.5 Firmware
Written and Compiled by Zettablade

I've updated the module, fixed some bugs, and changed some controls. Be sure to try it out!

This is my attempt at making a useful module for the 1.50 XMB.

Features:

-Takes screenshots with the LTrig+RTrig
-Auto USB (just plug it in and it connects automatically)
-Overs clocks the CPU to 333/333/166 for speed
-Change the CPU with the LTrig or the RTrig
--LTrig Lowers it to 222/222/111
--RTrig raises it to 333/333/166

Quick note - I would love to add a visual display of the current cpu, but it doesn't look possible on the XMB.

Bugs:

-If you go into the USB under system, then the auto usb will stop working until you do a hard reset.
-The PSP cannot veiw screenshots, but a compter can.

Fixes:

-Paparazzi bug, where it takes screenshots nonstop.

What To expect in the next version:
-Fix the USB bug.
-Fix the corrupt screenshot bug (remember, you can still use them on a computer)
-Powersave on hold

//----------------------------

Requirments:

-A PSP
-A USB cable
-Ver 1.50 firmware only! (for now)

Instuctions:

1. If you havn't already, use Dark_Alex's custom firmware flasher, because it's what this was tested on.

2. Copy the "Module" folder to the root of your mem stick.

3. in PSP/SYSTEM open config.txt and edit these lines:

#loadmodule0 = "blahblah"
#loadmodule1 = "blahblah"
#loadmodule2 = "blahblah"
#loadmodule3 = "blahblah"
#loadmodule4 = "blahblah"
#loadmodule5 = "blahblah"
#loadmodule6 = "blahblah"
#loadmodule7 = "blahblah"
#loadmodule8 = "blahblah"
#loadmodule9 = "blahblah"

to look something like this:

loadmodule0 = "ms0:/Module/AIOMod.prx"
#loadmodule1 = "blahblah"
#loadmodule2 = "blahblah"
#loadmodule3 = "blahblah"
#loadmodule4 = "blahblah"
#loadmodule5 = "blahblah"
#loadmodule6 = "blahblah"
#loadmodule7 = "blahblah"
#loadmodule8 = "blahblah"
#loadmodule9 = "blahblah"

4. Hold the power switch until the psp is completely turned off, then turn it back on.

5. If you did everything right, you should now be able to take screenshots, have autoUSB, and the XMB should run faster.