Released: MacroFire 2.34

lycenhol · 28 Novembre 2008

Dopo Ibicelyne, un altro nipponico, Classg, si presenta sulla scena PSP con un plugin veramente interessante: MacroFire 2.34.

Questo utile homebrew permette tra le altre cose di:

Definire l'autofire

Definire macro

Impostare la sensibilità dello stick

Impostare la dead zone dello stick (risolvendo piccoli problemi di usura)

E' presente anche il codice sorgente nell'archivio. Purtroppo la documentazione è in giapponese.
Quindi dovremo aspettare di decifrare il funzionamento del plugin per scoprire tutte le opzioni.

Per il download qui

Stay tuned

Install
-------------------------------------------------
The following are included in the file ms0: / seplugins to copy.

macrofire.prx
macrofire.ini

Following, ms0: / seplugins in

vsh.txt
game.txt
pops.txt

Each of the following to add the path.

ms0: / seplugins / macrofire.prx

If you do not have these files, please create.

After going to write RIKABARIMODO, Plugins from the items

The plug-in needed to Enabled location.

However, VSH on the "Internet" is running a limited,

Rensha macro functions and features will not work, the only real can not adjust the sensitivity of the analog stick.

This feature allows them to other sites that mock attacks will be made to deal with that concern,

The measures to ease the restrictions we would like.

Use
-------------------------------------------------

Start the game, you use two buttons to control volume (and - the key) to press the Start menu.

This button can be changed in the configuration file.

See below for details of the "settings file", please refer to the items.

The basic menu is the following key operation.

↑ ↓: Move items

← →: Change option

○ button: the decision of items

?button: top

START button: menu to quit immediately

This is a typical operation, and other items to another depending on the features,

If you have another operation.

In this case, at the bottom of each key has been written about how to manipulate you.

Functions
-------------------------------------------------

MacroFire Engine

This plug-in or switch to be operated.

Macro functions and functions punches a button, and will affect all functions.

OFF shortly after the start of the game, so if you use the controller to switch ON.

In the configuration file can set the initial state.

Buttons to launch the menu

MacroFire game from the menu button to set the display.

If you want to use this to set the ON button, and the combination in the game by pressing the button,

MacroFire menus can be displayed.

In the configuration file can set the initial state.

Buttons to toggle the engine state

MacroFire Engine does not appear on the menu ON / OFF button to switch between sets.

Here you want to switch to the ON button to set the game in that push of a button combination,

If OFF ON to the MacroFire Engine, OFF ON Switch to you.

In the configuration file can set the initial state.

Tuning the analog stick sensitivity

Position and the sensitivity of the analog stick, the dead zone is set.

For more information, is included please manual_analogsens.txt

Rapidfire settings

Button set the blaze.

For more information, is included manual_rapidfire.txt please.

Macro settings

Run the macro settings and features.

For more information, is included at manual_macro.txt please.

Configuration file
-------------------------------------------------

Macrofire.ini base will be set and the

Rensha configuration file, except for some macro file using the same format.

For more information, please see the included manual_ini.txt.

Known problem
-------------------------------------------------

Close the menu and return to the game screen when the screen goes wrong moment.

"Portable Mainichi Issho" burst mode Why? "RAPID" does not work.

AUTO-RAPID" to work.

What's another way to push the button to leave the state, there has been a priority like.

Further cause is unknown.

Clicca per allargare...

psp man · 28 Novembre 2008

lycenhol ha scritto: ↑

Dopo Ibicelyne, un altro nipponico, Classg, si presenta sulla scena PSP con un plugin veramente interessante: MacroFire 2.34.

Questo utile homebrew permette tra le altre cose di:

Definire l'autofire

Definire macro

Impostare la sensibilità dello stick

Impostare la dead zone dello stick (risolvendo piccoli problemi di usura)

E' presente anche il codice sorgente nell'archivio. Purtroppo la documentazione è in giapponese.
Quindi dovremo aspettare di decifrare il funzionamento del plugin per scoprire tutte le opzioni.

Per il download qui

Stay tuned
Clicca per allargare...

ehm.. come si installa???

jeeg94 · 28 Novembre 2008

psp man ha scritto: ↑

ehm.. come si installa???
Clicca per allargare...

come tutti i prx mettendo il file macrofile.prx nella cartella seplugins e aggiungendo ai file vsh.txt e game.txt la stringa ms0:/seplugins/macrofire.prx
la domanda giusta è ehm... come si usa??

Entra o Registrati

BENVENUTO SU CONSOLE TRIBE

Released: MacroFire 2.34

lycenhol Tribe Active Member

psp man Tribe Member

jeeg94 Tribe Member